 |
 |
|
 |
 |
|
|
|
|
Electric radiant heating for ramps |
|
|
| |
Introduction |
|
|
| |
At Elementos Calefactores AS, we manufacture electric heating cables for the development of snow melting systems to avoid the accumulation of ice and snow, in outdoor parking lots, highways, accesses, etc.
Description
The Elementos Calefactores AS snow melting system for outdoor areas is a heating system designed to prevent the accumulate of snow or ice, in colder climates for: access ramps, pavements, streets, terraces, etc. |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
Applications
In parts of the world where temperatures are very low, the build up of ice and snow on driveways, ramps, roads, etc., represents a serious danger for vehicles and people.
The Elementos Calefactores AS snow melting system consist of a heating cable installed under the paving and controlled by a snow melting thermostat assisted by both floor and outdoor sensors, providing the best solution to avoid possible accidents, prevent slipping, and protect against the premature deterioration of infrastructures.
Purposes:
- Avoids build up of snow or ice in outdoor parking lots.
- Avoid accidents in streets or driveways.
- Maintenance of the public highway.
- To avoid deterioration of installations.
|
|
|
|
|
| |
|
Specifications of the heating cable
The heating cable we recommend for this kind of system is model CTCSM250/30.
It is a parallel heating cable with constant lineal wattage ideal for cutting to length as required by the project. Its principal feature is the heating wire which is wound in a spiral around the parallel conductor, insulated from the conducting wire except at contact points set at one metre intervals, alternating between each of the active conductors. In this way, the heating cable forms a series of elements running in parallel all fed by the same power cable which acts as the body. To choose the best solution for your project :
|
|
|
|
|
| |
|
Control and regulation
We recommend the digital thermostat ETO2, an electronic controller for fully automatic, economical ice and snow melting on outdoor areas.
- ETO2: Digital controller for ice and snow melting.
The ETO2 can detect outdoor temperature and moisture temperature with the help of these sensors:
- ETOG: Ground sensor for detection of temperature and moisture.
- ETOR: Gutter sensor for detection of moisture.
- ETF: Oudoor sensor for detection of temperature.
For more information:
|
|
|
|
|
| |
|
|
| |
Materials estimate
To study a project, we need to have all the relevant information: total surface area, geographic location of the area to be heated, type of surface, etc.
- Post, fax or email
 the plans and technical information for the area to be heated.
- Complete the form for radiant heating of ramps, paths and driveways etc.
- Download a copy of the request form, and send it by fax to: 00 34 93 486 3814, or to the following email address: heating@elementoscalefactores.com
- Or contact our technical department.
|
|
| |
|
|
|
|
| |
|
|
Go top  |
|
|
|
| Home | Elementos Calefactores AS | AS Products | AS Heating systems | AS Electric radiant floor | AS Technical data
|
| Elementos Calefactores AS - Tel. 00 34 93 486 36 82 - Fax. 00 34 93 486 38 14 - Email: heating@elementoscalefactores.com |
|
