Drum-heaters 50 L

Introduction

At ECAS, we manufacture drum heaters for the prevention of heat loss and heating of 50 litres drums.

Application

The main function of the drum heaters is to prevent and compensate for heat losses undergone by certain fluids during the production process.

It is essential that the fluid or product stored in the drum does not freeze and/or change its viscosity or any of its properties, it also prevents these changes affecting the container.

BFV drum-heaters

Drums, barrels, cans, containers ...

The BFV heater range consists of ready to install heating systems.

Their careful design, robust and easy to handle construction means they can be easily fitted to the drum.

The BFV drum heaters are especially suitable for surface heating as they provide a uniform temperature and, thanks to our wide range of thermostats and temperature control and regulation panels, they prevent the deterioration of temperature sensitive products due to overheating.

Standar drum heaters

Below we present our catalog of standard drum-heaters. The following catalog comprises heating blankets for drums of 50 liters.

Modifications

To request a modification of any of the features of the standard range of blankets for drums, please contact our technical department.

Thermostats

All our heating blankets have a thermostat of one type or another.

At ECAS, we offer different control and regulation solutions:

AT056: economic analog thermostat

• Temperature range: 0-90º C
• Voltage: 230 V
• Maximum load current: 15 A
• On/Off differential: 4º C
• Sensor: Bulb and capillary sensing - 1 metre

AT056-i: integrated economic analog thermostat

• Temperature range: 0-90º C
• Voltage: 230 V
• Maximum load current: 15 A
• On/Off differential: 4º C
• Sensor: Built-in the heater

We can also offer more precise control devices:

DP25A: digital programmable thermostat

• Control panels prepared to work outdoor, from -20º C to +140º C.
• Case with transparent window: IP-65
• Connection entrances: PG-9
• Relay output: 25 A
• Allows different types of sensors: PTC, PT100, etc.
• Voltage: 230 V

Quotation

To be able to offer you the most suitable heater, we must know all the drum specifications, the product that it contains, etc.

You can request a quotation for a drum heater that is suitable for your application, using any of these options:

• Send us by conventional post, fax or email, the drum characteristics, the material of which it is made, type of product stored, temperature you wish to achieve, ambient conditions, etc.
• Fill in the form below with all your details, drum specifications, product, temperature you wish to achieve, ambient conditions, etc.
• Contact our technical department: